Micro Limited SALCA Line Cutter Anode (Aluminum)
$68.03 – $131.85
- MICRO – (Sizes begin at only 3/4″ thick)
- Pressure DieCast to meet highest Mil-Spec standards
- Disc line cutter — guarding against propeller entanglement
- Two precisely sized halves that fasten around the shaft for best protection and to eliminate the risk of spinning
- Made in USA by Sea Shield Marine
- Description
- Additional information
Description
Aluminum Micro Limited SALCA Anode
| Part No | Shaft Size | Thickness | Outside Dim | Weight(lb) |
|---|---|---|---|---|
| SALCA-MLC-0750-ALU | 3/4″ | 3/4″ | 2″ Anode – 2-1/2″ Blade | .41 |
| SALCA-MLC-0875-ALU | 7/8″ | 3/4″ | 2″ Anode – 2-1/2″ Blade | .42 |
| SALCA-MLC-1000-ALU | 1″ | 3/4″ | 2-1/4″ Anode – 3″ Blade | .54 |
| SALCA-MLC-1125-ALU | 1-1/8″ | 3/4″ | 2-1/2″ Anode – 3-14″ Blade | .99 |
| SALCA-MLC-1250-ALU | 1-1/4″ | 3/4″ | 2-1/2″ Anode – 3-1/8″ Blade | .6 |
| SALCA-MLC-1375-ALU | 1-3/8″ | 7/8″ | 2-3/4″ Anode – 3-1/4″ Blade | .91 |
| SALCA-MLC-1500-ALU | 1-1/2″ | 7/8″ | 3″ Anode – 3-1/2″ Blade | 1.05 |
| SALCA-MLC-1750-ALU | 1-3/4″ | 7/8″ | 3-3/4″ Anode – 4-9/16″ Blade | 1.38 |
| SALCA-MLC-2000-ALU | 2″ | 7/8″ | 3-3/4″ Anode – 4-9/16″ Blade | 2.1 |
| SALCA-MLC-2250-ALU | 2-1/4″ | 1-7/16″ | 4″ Anode – 5″ Blade | 2.48 |
| SALCA-MLC-2500-ALU | 2-1/2″ | 1-1/2″ | 4″ Anode – 5″ Blade | 2.48 |
| SALCA-MLC-2750-ALU | 2-3/4″ | 1-1/2″ | 4″ Anode – 5″ Blade | 2.48 |
| SALCA-MLC-3000-ALU | 3″ | 1-1/2″ | 4″ Anode – 5″ Blade | 2.48 |
DESCRIPTION
This Sacrificial Anode Line Cutter Assembly (SALCA) solves two major problems: line entanglement and galvanic corrosion. The aluminum alloy metal helps protect the marine craft from corrosion in brackish or saltwater, while the stainless steel cutting edge slices through lines guarding the boat against propeller entanglement.
Designed by divers for divers this sacrificial anode is a convenient and economical alternative to other line cutters because it doesn’t require mounting by professionals.
It is composed of two-sized halves that fasten around the propeller shaft which eliminates spinning under pressure. Conformed to the highest MIL-A-24779 standards for the worlds best protection.
Additional information
| Weight | N/A |
|---|---|
| Part # | |
| Shaft Size | 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", 1-3/4", 2", 2-1/4", 2-1/2", 2-3/4", 3" |
