Zinc SALCA Line Cutter Anode
$47.94 – $128.49
- Easy verification inside and outside
- Easy installation-deep slotted screws for maximum torque.
- Allen Cap Screws available upon request
- Plastic keeper washer keeps screws from falling out.
- Disc line cutter — guarding your boat against the hazard of propeller entanglement
- Two precisely sized halves that fasten around the shaft for best protection and to eliminate the risk of spinning
- Description
- Additional information
Description
Zinc SALCA Line Cutter Anode
| Part No | Shaft Size | Thickness | Outside Dim | Weight(lb) |
|---|---|---|---|---|
| SALCA-0750 | 3/4″ | 1-1/4″ | 2″ Anode – 2-1/2″ Blade | 0.65 |
| SALCA-0875 | 7/8″ | 1-1/4″ | 2″ Anode – 2-1/2″ Blade | 0.67 |
| SALCA-1000 | 1″ | 1-1/2″ | 2-1/4″ Anode – 3″ Blade | 1.01 |
| SALCA-1125 | 1-1/8″ | 1-1/2″ | 2-1/2″ Anode – 3-14″ Blade | 1.17 |
| SALCA-1250 | 1-1/4″ | 1-1/2″ | 2-1/2″ Anode – 3-1/8″ Blade | 1.04 |
| SALCA-1375 | 1-3/8″ | 1-1/2″ | 2-3/4″ Anode – 3-1/4″ Blade | 1.26 |
| SALCA-1500 | 1-1/2″ | 1-1/2″ | 3″ Anode – 3-1/2″ Blade | 1.21 |
| SALCA-1750 | 1-3/4″ | 1-1/2″ | 3-3/4″ Anode – 4-9/16″ Blade | 2.43 |
| SALCA-2000 | 2″ | 1-1/2″ | 3-3/4″ Anode – 4-9/16″ Blade | 2.23 |
| SALCA-2250 | 2-1/4″ | 1-5/8″ | 4″ Anode – 5″ Blade | 2.96 |
| SALCA-2500 | 2-1/2″ | 1-5/8″ | 4″ Anode – 5″ Blade | 5.08 |
| SALCA-2750 | 2-3/4″ | 1-5/8″ | 4″ Anode – 5″ Blade | |
| SALCA-3000 | 3″ | 1-5/8″ | 4″ Anode – 5″ Blade |
This Sacrificial Anode Line Cutter Assembly (SALCA) solves two major problems: line entanglement and galvanic corrosion. The Zinc metal helps protect the marine craft from corrosion in salt water, fresh water, and brackish water while the stainless steel cutting edge slices through lines guarding the boat against propeller entanglement.
Designed by divers for divers this sacrificial anode is a convenient and economical alternative to other line cutters because it doesn’t require mounting by professionals.
It is composed of two-sized halves that fasten around the propeller shaft which eliminates spinning under pressure. Conformed to the highest Mil-A-18001 standards for the world’s best cathodic protection.
Additional information
| Part # | |
|---|---|
| Shaft Size | 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", 1-3/4", 2", 2-1/4", 2-1/2", 2-3/4", 3" |
| Type of Screws | Deep Slotted Screws, Allen Cap Screws |
