Saw Tooth Line Cutter Anode with Blade – SALCA Gen II (Aluminum)
$37.50 – $71.44
SALCA LINE CUTTER GENERATION II (ALUMINUM)
- Includes Aluminum Anode and Stainless Steel Blade assembly
- 2-Deep slotted Stainless Steel Screws providing maximum torque
- Allen Cap Screws Available upon request.
- Designed by divers and cling to the shaft for easy installation
- Made in USA by Sea Shield Marine
- Additional information
ALUMINUM SAW TOOTH LINE CUTTER ASSEMBLY COMPLETE WITH BLADE (STLC)
Micro limited designed clearance shaft collar anodes with Saw Tooth Line Cutter Blade are 3/4 to 7.8″ thick designed for cathodic protection for propeller shafts in salt water, fresh water, and brackish water. The SALCA Generation II thin anodes are useful when there is a limited or short distance between the keel/strut and the propeller. At the same time, are an affordable alternative to the high cost of purchasing, installing, repairing, and replacing conventional line cutters. The stainless steel saw tooth blades are reusable. Stainless steel screws or Allen cap screws upon request. Made in the USA to military specifications Mil-Spec MIL-A-18001 for maximum protection.
|Part No||Shaft Size||Thickness||Weight(lb)|
|STLC-0750-ALU-COMP||3/4″||3/4″ Thick LC||0.41|
|STLC-0875-ALU-COMP||7/8″||3/4″ Thick LC||0.42|
|STLC-1000-ALU-COMP||1″||3/4″ Thick LC||0.54|
|STLC-1125-ALU-COMP||1-1/8″||3/4″ Thick LC||0.99|
|STLC-1250-ALU-COMP||1-1/4″||3/4″ Thick LC||0.60|
|STLC-1375-ALU-COMP||1-3/8″||7/8″ Thick LC||0.91|
3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", 1-3/4", 2", 2-1/4", 2-1/2", 2-3/4", 3"
|Type of Screws||
Deep Slotted Screws, Allen Cap Screws