Zinc Micro-Limited SALCA Line Cutter Anode
$44.00 – $75.37
Zinc Micro Limited SALCA Anode
- MICRO-Thinner Version
- Zinc material for protection in saltwater
- Pressure DieCast to meet highest Mil-Spec standards
- Disc line cutter — guarding your boat against the hazard of propeller entanglement
- Two precisely sized halves that fasten around the shaft for best protection and to eliminate the risk of spinning
- Designed by divers for easy installation
- Description
- Additional information
Description
Zinc MICRO-Limited SALCA Line Cutter Anode
These Micro Limited Sacrificial Anode Line Cutter Assembly (SALCA) solves two major problems: line entanglement and galvanic corrosion. The Zinc metal helps protect the marine craft from corrosion in salt water, while the stainless steel cutting edge slices through lines guarding the boat against propeller entanglement. The Micro Limited SALCA is the perfect anode for that tight squeeze on your prop shaft.
Designed by divers for divers this sacrificial anode is a convenient and economical alternative to other line cutters because it doesn’t require mounting by professionals.
It is composed of two sized halves that fasten around the propeller shaft which eliminates spinning under pressure. Conformed to the highest Mil-A-18001 standards for the worlds best protection.
| Part No | Shaft Size | Thickness | Outside Dim | Weight(lb) |
|---|---|---|---|---|
| SALCA-MLC-0750 | 3/4″ | 3/4″ | 2″ Anode – 2-1/2″ Blade | |
| SALCA-MLC-0875 | 7/8″ | 3/4″ | 2″ Anode – 2-1/2″ Blade | |
| SALCA-MLC-1000 | 1″ | 3/4″ | 2-1/4″ Anode – 3″ Blade | |
| SALCA-MLC-1125 | 1-1/8″ | 3/4″ | 2-1/2″ Anode – 3-14″ Blade | |
| SALCA-MLC-1250 | 1-1/4″ | 3/4″ | 2-1/2″ Anode – 3-1/8″ Blade | .78 |
| SALCA-MLC-1375 | 1-3/8″ | 3/4″ | 2-3/4″ Anode – 3-1/4″ Blade | |
| SALCA-MLC-1500 | 1-1/2″ | 3/4″ | 3″ Anode – 3-1/2″ Blade | |
| SALCA-MLC-1750 | 1-3/4″ | 3/4″ | 3-3/4″ Anode – 4-9/16″ Blade | |
| SALCA-MLC-2000 | 2″ | 3/4″ | 3-3/4″ Anode – 4-9/16″ Blade | |
| SALCA-MLC-2250 | 2-1/4″ | 3/4″ | 4″ Anode – 5″ Blade |
Additional information
| Part # | |
|---|---|
| Shaft Size | 1-1/2", 1-1/4", 1-1/8", 1-3/4", 1-3/8", 1", 2-1/4", 2", 3/4", 7/8" |
