SALCA Line Cutter Anode (Aluminum)
$49.09 – $92.50
SALCA – SACRIFICIAL ANODE LINE CUTTER ASSEMBLY
- Easy size verification inside and outside.
- Easy installation-deep slotted stainless steel machine screws for maximum torque.
- Allen cap screws available upon request.
- Plastic Keeper rings prevent screws from falling out.
- Disc line cutter — guarding your boat against the hazard of propeller entanglement
- Two precisely sized halves that fasten around the shaft for best protection and to eliminate the risk of spinning
- Description
- Additional information
Description
SACRIFICIAL ANODE LINE CUTTER ASSEMBLY (SALCA) ALUMINUM OPTIONS
| Part No | Shaft Size | Thickness | Outside Dim | Weight(lb) |
|---|---|---|---|---|
| SALCA-0750-ALU | 3/4″ | 1-1/4″ | 2″ Anode – 2-1/2″ Blade | 0.29 |
| SALCA-0875-ALU | 7/8″ | 1-1/4″ | 2″ Anode – 2-1/2″ Blade | 0.31 |
| SALCA-1000-ALU | 1″ | 1-1/2″ | 2-1/4″ Anode – 3″ Blade | 0.47 |
| SALCA-1125-ALU | 1-1/8″ | 1-1/2″ | 2-1/2″ Anode – 3-14″ Blade | 0.53 |
| SALCA-1250-ALU | 1-1/4″ | 1-1/2″ | 2-1/2″ Anode – 3-1/8″ Blade | 0.52 |
| SALCA-1375-ALU | 1-3/8″ | 1-1/2″ | 2-3/4″ Anode – 3-1/4″ Blade | 0.65 |
| SALCA-1500-ALU | 1-1/2″ | 1-1/2″ | 3″ Anode – 3-1/2″ Blade | 0.70 |
| SALCA-1750-ALU | 1-3/4″ | 1-1/2″ | 3-3/4″ Anode – 4-9/16″ Blade | 1.11 |
| SALCA-2000-ALU | 2″ | 1-1/2″ | 3-3/4″ Anode – 4-9/16″ Blade | 1.00 |
| SALCA-2250-ALU | 2-1/4″ | 1-5/8″ | 4″ Anode – 5″ Blade | 1.23 |
| SALCA-2500-ALU | 2-1/2″ | 1-5/8″ | 4″ Anode – 5″ Blade | 1.23 |
| SALCA-2750-ALU | 2-3/4″ | 1-5/8″ | 4″ Anode – 5″ Blade | 1.23 |
| SALCA-3000-ALU | 3″ | 1-5/8″ | 4″ Anode – 5″ Blade | 1.23 |
This Sacrificial Anode Line Cutter Assemply (SALCA) solves two major problems: line entanglement and galvanic corossion. The aluminum alloy metal helps protect the marine craft from corrosion in brackish or salt water, while the stainless steel cutting edge slices through lines guarding the boat against propeller entanglement.
Designed by divers for divers this sacrificial anode is a convenient and economical alternative to other line cutters because it doesn’t require mounting by professionals.
It is composed of two sized halves that fasten around the propeller shaft which eliminatees spinning under pressure. Conformed to the highest MIL-A-24779 standards for the worlds best protection.
Additional information
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Part # | |
| Shaft Size | 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", 1-3/4", 2", 2-1/4", 2-1/2", 2-3/4", 3" |
| Type of Screws | Deep Slotted Screws, Allen Cap Screws |
