Micro-Limited Clearance SALCA Line Cutter Anode (Zinc)
$66.69 – $129.76
- MICRO-Thinner Version
- Pressure DieCast to meet highest Mil-Spec standards
- Disc line cutter — defending the hazard of propeller entanglement
- Two precisely sized halves that fasten around the shaft for best protection and to eliminate the risk of spinning
- Made in USA by Sea Shield Marine
- Description
- Additional information
Description
Zinc MICRO-Limited SALCA Line Cutter Anode
| Part No | Shaft Size | Thickness | Outside Dim | Weight(lb) |
|---|---|---|---|---|
| SALCA-MLC-0750 | 3/4″ | 3/4″ | 2″ Anode – 2-1/2″ Blade | |
| SALCA-MLC-0875 | 7/8″ | 3/4″ | 2″ Anode – 2-1/2″ Blade | |
| SALCA-MLC-1000 | 1″ | 3/4″ | 2-1/4″ Anode – 3″ Blade | |
| SALCA-MLC-1125 | 1-1/8″ | 3/4″ | 2-1/2″ Anode – 3-14″ Blade | |
| SALCA-MLC-1250 | 1-1/4″ | 3/4″ | 2-1/2″ Anode – 3-1/8″ Blade | |
| SALCA-MLC-1375 | 1-3/8″ | 3/4″ | 2-3/4″ Anode – 3-1/4″ Blade | |
| SALCA-MLC-1500 | 1-1/2″ | 3/4″ | 3″ Anode – 3-1/2″ Blade | |
| SALCA-MLC-1750 | 1-3/4″ | 3/4″ | 3-3/4″ Anode – 4-9/16″ Blade | |
| SALCA-MLC-2000 | 2″ | 3/4″ | 3-3/4″ Anode – 4-9/16″ Blade | |
| SALCA-MLC-2250 | 2-1/4″ | 1-7/16″ | 4″ Anode – 5″ Blade | |
| SALCA-MLC-2500 | 2-1/2″ | 1-1/2″ | 4″ Anode – 5″ Blade | |
| SALCA-MLC-2750 | 2-3/4″ | 1-1/2″ | 4″ Anode – 5″ Blade | |
| SALCA-MLC-3000 | 3″ | 1-1/2″ | 4″ Anode – 5″ Blade |
These Micro Limited Sacrificial Anode Line Cutter Assembly (SALCA) solves two major problems: line entanglement and galvanic corrosion. The Zinc metal helps protect the marine craft from corrosion in saltwater, brackish and freshwater while the stainless steel cutting edge slices through lines guarding the boat against propeller entanglement. The Micro Limited SALCA is the perfect anode for that tight squeeze on your propeller shaft.
Designed by divers for divers this sacrificial anode is a convenient and economical alternative to other line cutters because it doesn’t require mounting by professionals.
It is composed of two-sized halves that fasten around the propeller shaft which eliminates spinning under pressure. Conformed to the highest Mil-A-18001 standards for the world’s best cathodic protection.
Additional information
| Part # | |
|---|---|
| Shaft Size | 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", 1-3/4", 2", 2-1/4", 2-1/2", 2-3/4", 3" |
